washing procedure
_7
3.
Set the WATER INLET SELECTOR.
4.
Load laundry in the wash
tub.
5.
Fill water in the wash tub
and add the detergent.
6.
Set the WASH TIMER.
Set the Wash Timer 1-15 min. (option)
7.
After washing,set the DRAIN
SELECTOR KNOB to ‘DRAIN’
for draining.
Spinning dry
1.
Transfer the clothes into the spin basket and
arrange the clothes evenly.
Bottom of balancer
safety cover
3.
Close the spin dryer lid.
4.
Set the SPIN DRYER TIMER 1-5 minutes.
5.
Incomplete spining.(Severe vibration or
unbalance) See “When you load ...”on page 9.
2.
Be sure to attach the
safety cover and close the
inner lid.
Heavy wash
1.
Set the WASH SELECTOR KNOB to ‘HEAVY’.
2.
Supply the proper amount of water as not to
overflow the top of the washing tub.
3.
Set the WASH TIMER 10~15
minutes.
4.
Drain the water. Set the DRAIN
SELECTOR KNOB to ‘DRAIN’.
5.
Repeat this cycle until drain water is clean. (2~3
cycles)
6.
Be sure lay the drain hose down.
Soaking
1.
Place clothes into the WASH TUB.
2.
Turn on tap or use bucket to fill the
WASH TUB with desired amount of
water.
3.
Put detergent depending on the
water volume and detergent
package indications.
4.
Set WASH TIMER to point between
“15” to “35” in the timer.
• Soak-Washing automatically
starts the wash (15 min.) after the
soak (2 to 20 min.) is completed.
• The SOAK function (20 min.)
repeats the cycle that is
1.5 ~ 2.0 min. turning and
the next 5 min. resting 3 times.
Inner Lid
Safety
Cover
wash inlet
spin inlet
