Alignment and Adjustments
5-4
Samsung Electronics
5-8 Center Convergence Adjustment
1. Warm up the receiver for at least 20 minutes.
2. Adjust the BRIGHTNESS and CONTRAST
controls for a well-defined picture.
3. Adjust the two tabs of the 4-pole magnets:
Change the angle between them.
Superimpose the red and the blue vertical
lines in the center area of the screen.
4. Turn both tabs at the same time, keeping the
angle constant: Superimpose the red and blue
horizontal lines in the center of the screen.
5. Adjust two tabs of 6-pole magnets:
Superimpose the red and blue lines with the
green. Adjusting the angle affects the vertical
lines, and rotating both magnets affects the
horizontal lines.
6. Repeat adjustments 2~4, if necessary.
7. Since the 4-pole and 6-pole magnets interact,
the dot movement is complex (Fig. 5-3).
RED
BLUE
BLUE
RED
4-Pole Magnet Movement
GREEN
RED/BLUE
RED/BLUE
GREEN
6-Pole Magnet Movement
Fig 5-3 Center Convergence Adjustment
Summary of Contents for WS28W6HA
