Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable).
1
Press the
MENU
(
)
button.
Result:
The main menu is displayed.
2
Press the
ENTER
(
) button to select
Input
.
Result:
The options available in the
Input
group are
displayed.
3
Press the
ENTER
(
) button again to select
Source List
.
Result:
The options available in the
Source List
group are
displayed.
4
Press the
▲
or
▼
button to select signal source, then press the
ENTER
(
) button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks :
EXT1
or
EXT2
on the
TV’s rear panel, and
AV/S-Video
on the TV’s side panel.
➢
You can also set these options simply by pressing the
SOURCE
(
) button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
Edit Name
1
Press the
MENU
(
)
button.
Result:
The main menu is displayed.
2
Press the
ENTER
(
) button to select
Input
.
Result:
The options available in the
Input
group are
displayed.
3
Press the
▲
or
▼
button to select
Edit Name
.
Press the
ENTER
(
) button.
Result:
The options available in the
Edit Name
group are
displayed.
4
Press the
▲
or
▼
button to select external device :
EXT1
-
EXT2
-
AV
-
S-Video
.
5
Press the
œ
or
√
button.
6
Select the name by pressing the
œ
or
√
button.
7
Set other signal sources (
EXT1
,
EXT2
,
AV
,
S-Video
) using the
same method as listed above.
Viewing an External Signal Source/Edit Name
(depending on the model)
Move
Enter
Return
Input
Source List
: TV
√
√
Edit Name
√
√
TV
Move
Enter
Return
Input
Source List
: TV
√
√
Edit Name
√
√
TV
Move
œ
œ √
√
Adjust
Return
Edit Name
EXT1
œ
œ
------
√
√
EXT2
: ------
AV
: ------
S-Video
: ------
TV
Move
œ
œ √
√
Adjust
Return
Edit Name
EXT1
œ
œ
DVD
√
√
EXT2
: ------
AV
: ------
S-Video
: ------
TV
Move
Enter
Return
Source List
TV
EXT1
: ------
EXT2
: ------
AV/S-Video
: ------
TV
English - 35
AA68-03660A-00Eng 6/7/05 4:46 PM Page 35