network
Unfold <Network> to show its sub-options: Network, Email, DDNS and RTSP configuration.
lAn setting
NVR supports Static/DHCP/PPPoE modes. System default network type is
<DHCP>. User can set parameters as required. If you change Network type to
PPPoE, NVR will automatically restart to make the setting effective.
Email: Set NVR alarm Email configuration parameters, including Email address,
Encryption, Email Enable, and Interval etc. Detailed parameters should be
consistent with NVR local setting.
ddns
DDNS: After user applies for DDNS service, you could enable <DDNS>
function under any one network type mode (Static, DHCP and PPPoE). And
you may remotely visit the NVR through domain name (http://domain name:
HTTP port No.). When visiting NVR by using DDNS, user should make sure
port and current IP can be normally connected in public network. Details
settings, including server address, host, user, and password, should be
consistent with NVR local setting.
Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS
Test is Successful!
rtsp
The relevant parameters should be consistent with NVR local setting.
English
_43
●
w
eB
Appli
CA
tion M
An
Ager