Samsung WISENET BabyView, User Manual

Page: 13 / 60

English ·
13
03
Getting Started
VOX (Voice activated)
Select to monitor and listen for significant sound levels with reduced
ambient noise.
The screen goes off in “VOX” mode if there is no significant sound louder
than a certain level about 30 seconds. The monitor screen turns back on
as soon as it detects sound around the camera.
In “VOX” mode, you can set the sensitivity.
• Low Sound Level Detection : Sets to higher sensitivity.
• High Sound Level Detection : Sets to lower sensitivity.
Function Description
1. Go to the Google Play or Apple App Store to install the "Wisenet BabyView App"onto
your mobile phone.
2. Turn camera on.
3. Press the "reset" button on the camera.
4. Click " " on your phone to search for the camera's Wi-Fi. Once you find it, press
the camera's Wi-Fi name to connect (picture 1).
5. Click the APP" ", then click "tap here to add device" (picture 2).
6. Scan the QR code found on the bottom of the camera or search, then enter in the
default password "000000", and click "OK" when finished (picture 3~5).
The monitor will show a "remote" icon on the screen when remotely connected to the
baby unit via "BabyView" App. Another way to remotely connect:
7. Search to see your camera and UID. You can reset the WLAN by clicking the " "
icon (picture 6).
8. Press WLAN and select a local network, then input your local Wi-Fi Password (picture
7~11).
9. You can also press WLAN to connect the camera to your local router and change the
camera to Internet mode (picture12).
When you want to remotely connect 2 or more mobile phones with the camera, after
above steps, please set the other mobile phone(s) as below:
10. Click " " on phone and press WLAN which have connected with the camera
(picture 12).
11. Click the APP" ", then click "tap here to add device" (picture 2).
12. Scan the QR code found on the bottom of the camera or search, then enter in the
password, and click "OK" when finished (picture 3~5).
Mobile Application
Photo Diary
This feature allows you to make a photo diary of your baby. Set the capture time and the
camera will take a pitcure once a day in HD. The pictures will be stored to the micro
SDcard. If you are not satisfied with the photo of the day, you can reset the capture time
and the inital picture will automatically be replaced by the new picture.
Dual-Mode monitoring
You can remotely monitor your baby via BabyView monitor and Wisenet BabyView App at
the same time.
The quality from the mobile App may be low based on the netowrk condition.
If you want to use dual-mode monitoring, please see the follow ‘Mobile Application’ guide.
SEW-3053W-170117.indd 13 2017/1/17 14:41:14