35
Cleaning y
our washing machine
Cleaning the detergent drawer and drawer recess
1.
Press the
release lever (A)
on the inside of the detergent drawer
and pull the detergent drawer out.
2.
Remove the
release lever (A)
and the liquid detergent guide from
the detergent drawer.
A
3.
Wash all parts under running water.
4.
Clean the detergent drawer recess with an old toothbrush.
5.
Replace the
release lever (A)
and the liquid detergent guide by
pushing them firmly into the detergent drawer.
6.
Push the detergent drawer back into place.
7.
To remove any remaining detergent, run the Rinse+Spin cycle
without any laundry in the drum.
Cleaning the mesh filter
You should clean the mesh filter at least once a year, or when the “
4E
” error code is displayed.
1.
Unplug the washing machine from the electrical outlet.
2.
Turn off the water supply to the washing machine.
3.
Disconnect the L-shaped arm fitting for the water supply hose from
the water supply intake at the back of the machine by turning
part
(A)
. To prevent water from running out due to the air pressure in
the water supply hose, cover the hose connection with a cloth.
4.
Gently pull out the mesh filters from the water supply intakes using
a pair of pliers and rinse them under running water until they are
clean.
5.
Reinsert the mesh filters.
6.
Reconnect the L-shaped arm fitting to the water supply intake.
7.
Make sure the connections are watertight and turn on the water
tap.
A
Untitled-6 35
2013-04-30 �� 6:44:18
