17
Setting up y
our washing machine
STEP 3 - Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply, and the drain
are easily accessible.
1.
Slide the washing machine into position.
2.
Loosen all the lock nuts with the wrench.
3.
Level your washing machine by turning the levelling feet as
necessary by hand.
4.
When your washing machine is level, tighten the lock nuts using
the wrench.
CAUTION
: Do not move your washing machine unless
you tighten the lock nuts. This may result in damage to the
leveling feet.
STEP 4 - Connecting the water and the drain
Connecting the water supply hose
WARNING
: Do not connect multiple water supply hoses together. This may result in a water leak
and electric shock due to the water leak. If the hose is too short, replace the hose with a longer, high
pressure hose.
1.
Connect the L-shaped arm fitting for the cold water supply hose to
the cold water supply intake at the back of the washing machine.
Then tighten it by turning
part (A)
clockwise by hand.
(*)
: Optional
A
2.
Remove the
adaptor (B)
from the other end of the
water supply
hose (C)
.
B
C
Untitled-6 17
2013-04-30 �� 6:44:13
