# tsWF520 RevB 03/21/2011
7
Pre Wash
Main Wash
Softener
Bleach
Path #2
Path #1
Path #3
Path #4
Path #5
V#1
V#2
V#3
V#4
V#5
MAIN(H) PRE WASH BLEACH
MAIN(C)
STEAM
Water valve connections for the Detergent Drawer
When installing a washer and dryer on
the first, or second floor, do not exceed
this leg adjustment height for stability.
Stacking Kit : (Model No : SK-5A/XAA)
Samsung washers and dryers can be stacked to maximize usable space.
An optional stacking kit is available for purchase from your Samsung retailer
Items Packed With Washer
BOLT-SPANER (10-13mm Wrench) DC60-40146A
ASSY HOSE WATER HOT DC97-15648B
ASSY HOSE WATER COLD DC97-15648A
MANUAL-BOOK DC68-02838A
CAP-FIXER DC67-00307A
HOSE-HANGER DC62-10278A
When using non-HE
detergents, or using
too much detergent
for the water hard-
ness and soil level of
the clothing, over
sudsing will occur.
When this happens
there will be leaks out
of the detergent
drawer and door.
Please advise con-
sumer of proper de-
tergent usage.
It is normal for a small amount of water
remaining in Detergent Drawer after it
completes washing. Bleach is usually
flushed out into the tub at the beginning
of the washing. Also, its compartment is
washed again during the following rinse
cycle, removing any remnants.
Location considerations
Do not install your washer
in areas where water
may freeze, since your
washer will always main-
tain some water in its wa-
ter valve, pump, and hose
areas. This can cause
damage the belts, the
pump, hoses and other
components.
Operating
temperature should be
above 60°F/16°C.
