Troubleshooting
English
54
Troubleshooting
Problem
Action
Excessive suds.
•
Make sure you use the recommended types and amounts of
detergent.
•
Use high efficiency (HE) detergent to prevent oversudsing.
•
Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
•
Don't use Non-HE detergent.
Cannot add additional
detergent.
•
Make sure the remaining amount of detergent and fabric
softener is not over the limit.
The washer stops.
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the door and press
Start/Pause (Hold to Start)
to start
the washer. For your safety, the washer will not tumble or
spin unless the door is closed.
•
Before the washer starts to fill, it will make a series of
clicking noises to check the door lock and does a quick drain.
•
There may be a pause or soak period in the cycle. Wait briefly
and the washer may start.
•
Make sure the mesh filter of the water supply hose at the
faucets is not clogged. Periodically clean the mesh filter.
•
If the washer is not supplied with sufficient power, the
washer temporarily will not drain or spin. As soon as the
washer regains sufficient power, it will operate normally.
Untitled-6 54
Untitled-6 54
2020-04-02 4:27:09
2020-04-02 4:27:09
