Installation
English
22
Installation
STEP 3
Adjust the leveling feet
1.
Gently slide the washer into position.
Excessive force may damage the
leveling feet.
2.
Using a wrench, turn the leveling feet
clockwise or counterclockwise to adjust
the height until the washer is level.
3.
Using a flathead screwdriver, tighten
the
locking nuts (A)
.
NOTE
Use the open-end of the supplied wrench
to adjust the leveling feet.
STEP 4
Connect the water hose
B
A
CAUTION
• Make sure to use new water hoses and
that
rubber gaskets (B)
are inside the
couplings (A)
at both ends of the hoses.
Water hoses without the gaskets may
leak.
• Allow 5 in. (127 mm) of space between
the back of the washer and the wall to
prevent water hoses from being kinked.
Kinked hoses may cause water leaks.
• If there is a water leak, stop using the
washer and contact a local Samsung
service center. A water leak may cause
electric shock.
• Do not stretch the water hoses by force.
If a hose is too short, replace the hose
with a longer hose.
Untitled-2 22
3/30/2020 12:25:44 PM
