Samsung WF42H5 Series, Training Manual

Page: 31 / 55

4.Instruction of Function
◆
Child Lock
This function prevents children from playing with your washer.
Activating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.
• When you activate the Child Lock function, the door locks and the “Child Lock []” lamp illuminates.
• If you press the Start/Pause button after you have activated the Child Lock function , none of the
buttons will work except for the Power button.
• If you press a button when the buttons are locked, the “Child Lock []” lamp blinks.
Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child Lock function, you can pause the Child
Lock operation for 1 minute by pressing and holding both the Spin and Soil Level buttons simultaneously
for approximately 3 seconds.
• If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user
convenience. During this period, the “Child Lock []” lamp blinks.
• If you open the door after the minute is over, an alarm sounds for up to 2 minutes.
• If you close the door within the 2 minutes, the door is locked and the Child Lock function is reactivated.
If you close the door after the 2 minutes, the door is not locked automatically and no alarm sounds.
Deactivating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6 seconds.
◆
Spin Only
If you press the Power button and then press and hold the Spin button for 2 seconds, the spin time will
be displayed on the display panel.
Then, press the Spin button repeatedly until the required spin level is selected, and then press the
Start/Pause button.
30/54