1-3
■ Grounding
►
Make sure to ground the unit to prevent
electric leakage or shock.
With a grounded receptacle
► It does not need an additional grounding.
■Water Drainage
► Hook the drain hose over the Wash Basin or Laundry
Tub or plug the end of the drai hose into the Standpipe
- Hook the drain hose over the Wash Basin or Laundry
Tub or plug the end of the drain hose into the Standpipe
- The outlet end of the drain hose must be at least
60-90 cm above the base of the machine.
► Seal the drain pipe connections
- If not, it may cause water leakage.
► Prevent water from siphoning away
- If the end of the drain hose is put in water, it could siphon
away water during washing.
So, make sure that the end of the drain hose is not put in
water.
Note: Caution must always be exercised to avoid collapsing
or damaging the drain hose.
For best performance the drain hose should not be
restricted in any way, through elbows, couplings or
excessive lengths.
1-2. Precautions upon Installation
Summary of Contents for WF306BAW/XAA
