Samsung WF306BAW/XAA, Service Manual

Page: 18 / 89

3-6
FOR SILVERCARE WASHING
Silver ions are added during the wash and rinse cycles to maximize the sanitizing and antibiotic effects, treating fabrics with a
microscopic coating protection that kills more than 650 kinds of bacteria.
1.
Open the door, put in the clothes and close the door again.
2.
Press the Power button.
3.
Select a Cycle by turning the Cycle Selection dial.
4.
Press SilverCare button.
5.
Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.
:
For Pre Wash, put a supplementary detergent in the dispenser.
SilverCare: If it is used together with fabric softener, its effect may be decreased.
6.
Press Start/Pause button.
: Automatically selects optimal washing conditions by sensing the laundry’s weight.
Note :
FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE TREATMENT
AUTHORITIES BEFORE USE
You can find # of times you used SilverCare option by pushing signal and SilverCare button.
LU3 : less than 1000 times
LU2 : between 1000 to 2000 times
LU1 : between 2000 to 2999 times
LU0 : over 2999 times
You should replace the silver kit when it display “LU0”. Contact 1-800-SAMSUNG.
Note :
For some model which has no heater if you choose SilverCare, Temp will be fixed to Cold/Cold.
If you change Temp selection, SilverCare will be canceled.
3-3. MAIN FUNCTION