Samsung WF0804W8N/XSG, User Manual

Page: 26 / 88

26_
washing a load of laundry
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1.
Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “ Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4.
To cancel a Delay End function, press the
Power
button and then turn the washing machine
on again.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button
convenience.
By pushing the
My Cycle button, press the My Cycle button to load and use the saved My
Cycle options. The “ My Cycle ” light will indicate activation. Also, the chosen course and option
lights will flicker.
You can set all options as follows in the My Cycle mode.
1. Turn the water supply on.
2. Press the Power button.
3.
Select cycle using the
Cycle Selector
.
4. After cycle selection, set each option.
See the “Cycle Chart” on page 39 for available option settings with each cycle.
5. You can then store the selected cycle and options by pressing and holding the My Cycle
button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be
displayed the next time you choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
If you press My Cycle and release it within 3 seconds, the previously saved course and
options appear. If you press and hold My Cycle for 3 second or longer, the currently set
course and options are saved and the LED blinks for 3 seconds.
washing a load of laundry
WF0804W8-02842P_EN.indd 26 2011-2-14 11:51:07