18_
setting up your washing machine
setting up your washing
machine
Connecting the water supply hose
1.
Remove the adaptor from the water supply hose.
2.
First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
3.
Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
4.
Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
adaptor
Water supply
hose
1
2
5 mm
1
2
Water tap
option
3
WF0804W8-02842P-04_EN.indd 18
2014/6/30 14:36:55
