Samsung WD95J5 Series, User Manual

Page: 54 / 120

54 English
Tr
ouble
shoo
ting
Troubleshooting
Problem Action
LC
Check the drain hose.
•
Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “LC”/“LC1” code, the washer
do draining for 3 minutes. During this time, the Power
button is inoperative.
LC1
UB
Spinning does not work.
•
Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an “
UB ” check message
will be shown in the display.
3C
Check the Motor for operation.
•
Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
UC
The electronic control needs to be checked (Over Voltage Error).
•
Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
•
Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
HC
High temperature heating check
•
If the information code remains, contact a customer service
centre.
WD95J5410AW_03666K-00_EN.indd 54 2020/6/8 13:45:41