28
_
Disassembly and Reassembly
Part name
Description
Figure
WASH
HEATER
1. Separate the Back Cover.
2. Separate the Connection Hous
-
ing (4).
3. Remove the nut holding the
heater and separate the Heat
-
er.
4. Remove the Heater from the
Tub.
Caution
Make sure to insert the Heater into the
correct position of the bracket inside the
Tub when reassembling it. Otherwise, there is a danger of a fire.
Make sure to push it inwards until the packing part comes into
the Tub completely when reassembling it so that the packing
part is completely stuck to the Tub. Fasten the holding nut with a
force of 5Kgf/cm2. If the nut is not fastened properly, there is a
danger of water leaking.
WD6500K_7-8-9-11kg_1400rpm-SM.indb 28
2018/11/9 9:53:25