D-1
SAMSUNG
Washing Machine Owner’s Instructions
Problems and solutions
The washing machine will not start
•
Make sure the door is firmly closed.
•
Make sure the washing machine is plugged in.
•
Make sure the water source faucet is turned on.
•
Make sure to press the Start/Pause button.
No water or insufficient water supply
•
Make sure the water source faucet is turned on.
•
Make sure the water source hose is not frozen.
•
Make sure the water intake hose is not bent.
•
Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash program is complete
•
Make sure the washing machine is running with sufficient water pressure.
•
Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
•
Make sure the washing machine is set on a level surface. If the surface is not level, adjust the
washing machine feet to level the appliance.
•
Make sure that the shipping bolts are removed.
•
Make sure the washing machine is not touching any other object.
•
Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
•
Make sure the drain hose is not squashed or bent.
•
Make sure the debris filter is not clogged.
Understanding error messages
Error displayed
Solution
dE
•
Close the door.
4E
•
Make sure the source water faucet is turned on.
•
Check the water pressure.
5E
•
Check if the water in the drain hose is frozen.
•
Press the [Start / Pause] Button to resume operating.
UE
•
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the final
spin result might be unsatisfactory and an “UE” error message will be shown in the
display window.
Hot
•
It appears when the internal temperature of the drum is high.
The fan will automatically function, so just wait until [Hot] indication disappeared.
cE
•
This is when the internal temperature does not go down below a certain degree
in washing or hydrating.
Press the Start/Pause button to try again.
3E
•
Call after-sales service.
Before contacting After-Sales service:
1.
Try to remedy the problem (See “Troubleshooting” on this page).
2.
Restart the programme to see if the fault is repeated.
3.
If the malfunction persists, call after-sales service and describe the problem.
Troubleshooting
WD7122CZ-02540K_EN.indd 1
2008-08-13 ¿ÀÀü 9:36:52
