Samsung WD10N6 Series, User Manual

Page: 23 / 72

English 23
Ins
tallation
3. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre in case of a leak from the
water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise,
this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water
hose (B) .
2.
Use a Philips screwdriver to loosen four
screws on the adaptor.
WD10N641R2X_DC68-04055L_EN.indd 23 2020/1/16 15:51:55