Samsung WA85N6750B Series User Manual Download Page 30

Page: 30 / 48

30 English

Oper

ations

Operations

Auto cycles

Cycle

Description

Cycle 1

COTTON

•

For most fabrics including cottons, linens, and
normally soiled items.

SUPER CLEAN

•

Select this if you want to produce powerful cleaning
performance.

WATER SAVING

•

Select this to wash effectively with a minimum
amount of water.

•

WA85N6750B* : "

WATER SAVING

Water Level

10,

Wash Time

27 min,

Rinse Times

Spin Time

30 min,

Temp.

Cold

Hot

" is recommended for a normally

soiled cotton load.

NOTE

Energy and water labelling test program in accordance
with AS/NZS 2040.

COLORS / DARKS

•

For bright or dark colored casual items.

Cycle 2

DELICATES

•

For sheer fabrics, bras, lingerie, silks, and other
handwash-only fabrics. For best results, use liquid
detergent.

BABY CARE

•

Featuring a high-temperature wash and extra rinses
to help remove the remaining detergent effectively.

TOWELS

•

For bath towels, washcloths, and mats.

BEDDING

•

For bulky items such as comforters, blankets, and
sheets.

•

For best results, wash only a single type of bedding.

WA6700N_DC68-03892N-01_EN.indd 30

2018-05-24 11:46:32

Summary of Contents for WA85N6750B Series

















































Search results

Summary of Contents for WA85N6750B Series

Reviews:

Related manuals for WA85N6750B Series

Brands by name

Popular brands

Samsung WA85N6750B Series, User Manual

Search results

Summary of Contents for WA85N6750B Series

Reviews:

Related manuals for WA85N6750B Series

Brands by name

Popular brands