setting up your new washing machine
_9
01 setting up
connectIng the drAIn hoSe
• Decide direction of the drain hose
• Insert end of the drain hose into the
drain-outlet.
Cautions when inserting the drain hose:
Don’t exceed more than
3m when the drain hose is
used by connecting whth
other hoses.
Be careful to drain water
out at the end of the drain
hose.
The doorsill shoudn’t be
more than 5cm.
test run
Make sure that you install your washing machine correctly by running the
rinse+Spin
cycle after the installation is complete.
hoW to chAnge the drAIn hoSe dIrectIon
The drain hose has been installed at left side
of the washer before delivery, but users may
change it to right side according to actual
drain place.
1.
Put blanket or soft cloth on the floor; lay
down the washer backwards lightly.Take
out the drain hose from the outlet at left
side, and remove the cover at
Outlet of
the drain hose (Right)
; Don’t lay down the
washer on the floor directly; otherwise, the
floor or washer may be damaged.
2.
Insert the drain hose along the groove at
bottom of the washer.
3.
Align its cover with the cover at
Outlet of
the drain hose (Left)
, lift it lightly and place
the washer properly.
Before changing the direction, the power must be off (to avoid risk of electric shock).
Don’t damage the drain hose when changing its direction; Water may leak if the hose
is damaged.
ASSeMblIng the rAt protectIon pAnel(optIon)
1.
Insert the panel into the mounting groove at bottom of the
washer.
2.
If it’s hard to insert, lift the washer slightly and insert.
3.
After the panel is inserted properly, press the locking slot of the
panel into the related groove at bottom of the washer.
4.
Fix the panel with the bolts( provided in the plastic bag for User
Manual)
小于 3 m
小于 3 m
小于
5 cm
Less than 3m
Less than 3m
Less than
5cm
前面
排水管
取出口
(左)
排水管
取出口
(右)
毯子等
孔盖
后面
Outlet of the
drain hose (L)
Outlet of the
drain hose (R)
Blanket etc.
Front
Rear
Cover
前面
排水管
取出口
(左)
排水管
取出口
(右)
毯子等
孔盖
Outlet of the
drain hose (R)
Blanket etc.
Cover
Outlet of the
drain hose (L)
Front
后面
固定槽
Rear
Locking
slot
M-PJT_DC68-03032E-04_Philippines_EN.indd 9
2014/4/30 10:42:21
