12_
installation&maintenance
HOW TO CONNeCT THe DRAIN HOSe(OPTION)
in cAse of pump-DrAineD WAsher
Take out the cap-hose and connect the outlet-hose.
Be sure to join tightly the drain hose into the drainoutlet on the back of the
machine.
Be sure to join tightly the drain hose into the drain-outlet on the side of the
machine.
Install the drain hose in the position of about 90~100cm above the ground.
connecTinG The DrAin hose
After pressing the joint ring(a), insert the drain hose(b) to drain
direction.
Test run
Make sure that you install your washing machine correctly by running the
rinse
+
spin
cycle after the
installation is complete.
HOW TO PUT THe DeTeRGeNT IN
1.
Open the detergent box by pulling in the direction of the arrow as shown in the figure and then
put the powder detergent in the detergent box.
2.
Put in one-time amount of detergent evenly so the detergent may not brim over the box.
If you spread a powder detergent over the laundry directly, it may result in discoloration.
Make sure to insert it into the detergent compartment.
installation & maintenance
cAuTion
cap-hose
(a)
(b)
90~100cm
WA80G5PEP-02898E-02_EN.indd 12
2012-12-18 �� 4:46:14
