English - 16
ASSEMBLING THE RAT PROTECTION PANEL (OPTION)
Tilt the washer a little and lift up the panel until it clicks, fi nally fi x the panel with screw to the
base as shown in the fi gure.
Rear-side
1.
Insert the rat protection panel to the
assembling hole on back side to the end.
2.
If you have diffi culty inserting the panel lift
up the washer a little and insert it.
HOW TO CONNECT THE DRAIN HOSE (OPTION)
IN CASE OF PUMP-DRAINED WASHER
cap-hose
Take out the cap-hose and connect the
outlet-hose.
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
90~100cm
Be sure to join tightly the drain hose into the
drain-outlet on the side of the machine.
Install the drain hose in the position of about
90~100 cm above the ground.
installation & maintenance
GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:16
GAIA-Sniper_DC68-02910B_EN (India)_140731.indd Sec5:16
2014-07-31
5:59:29
2014-07-31
5:59:29
