English 35
W
ashing a load o
f laundry
NOTE
You can change the My Cycle settings by
repeating the process above.
The last saved settings will be displayed the
next time you choose the My Cycle function.
NOTE
If you press
My Cycle
and release it within
3 seconds, the previously saved cycle and
options appear. If you press and hold
My
Cycle
for 3 second or longer, the currently
set cycle and options are saved and the LED
blinks for 3 seconds.
Delay End
You can set the washer to start your wash
automatically at a later time, by choosing a
delay time.
The hour displayed indicates the time at
which the wash will be ended.
1.
Set your wash cycle.
2.
Press
Delay End
repeatedly until the
delay time is set.
3.
Press
Start/Pause
. The “Delay End”
indicator will be lit, and the clock will
begin counting down until it reaches the
set time.
4.
To cancel a Delay End function, press the
Power button and then turn the washer
on again.
Pre Soak
Use this function when the laundry is
heavily contaminated or stained. This
function improves the wash performance by
adding a Pre Soak cycle.
•
If you select this function, the total cycle
time is increased by 18 minutes.
•
When the Pre Soak cycle starts, the
washer repeats a wash cycle after
supplying water and then performs a
18-minute soak cycle.
•
When the Pre Soak cycle is complete,
the configured wash cycle starts without
draining water.
Eco Plus
This function sets the temperature
somewhat lower than the typical washing
cycle and extends the wash time slightly.
With laundry time slightly extended, it’s
possible to keep the same level of washing
performance with cooler water. This function
reduces energy consumption and maintains
the quality of the wash.
Mist Shower
Mist Shower sprays water from a nozzle
that is independent of the main water
supply system. It states that is soaks the
laundry with water from the beginning of
the rinse cycle and ensures an effective
wash, but it’s not part of the wash cycle, it’s
part of the rinse cycle, so this needs to state
that it ensures an effective rinse.
(The Mist Shower function may not work if
there is too large of a load in the machine.)
Smart Care
This function enables you to check the
status of the washer using a smartphone.
1.
To enable the Smart Care function, press
and hold
Fabric Softener
for 3 seconds
after turning the power on or when an
error occurs.
WA8700K_WA50K-03647A-01_EN.indd 35
2016/1/13 16:49:59
