Samsung WA47CG3500A Series, User Manual

Page: 22 / 216

Installation
English 22
Installation
Step-by-step installation
STEP 1
Select a location
Location requirements:
• A solid, level surface without carpeting or flooring that may obstruct ventilation
• No direct sunlight
• Adequate room for ventilation and wiring
• Ambient temperature always higher than the freezing point (32 °F / 0 °C)
• Away from heat sources
STEP 2
Connect the water hose
B
A
CAUTION
• Make sure to use new water hoses and
that
rubber gaskets (B) are inside the
couplings (A) at both ends of the hoses.
Water hoses without the gaskets may
leak.
• Allow 6 in. (150 mm) of space between
the back of the washer and the wall to
prevent water hoses from being kinked.
Kinked hoses may cause water leaks.
• If there is a water leak, stop using the
washer and contact a local Samsung
service center. A water leak may cause
electric shock.
• Do not stretch the water hoses by force.
If a hose is too short, replace the hose
with a longer hose.
Untitled-1 22 Untitled-1 22 2023-03-31( ) 11:06:31 2023-03-31( ) 11:06:31