Samsung WA40J3000AW/AA, User Manual

Page: 13 / 120

English - 13
Required dimensions for Installation
importAnt note to instAller
Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation Flow chart
step 1 Selecting a Location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as a furnace, water heater, etc.
• Has enough space so that the washer doesn’t rest on it s power cord.
27.0 in.
(68.6 cm)
43.9 in.
(111.7 cm)
39.3 in.
(99.8 cm)
29.3 in.
(74.4 cm)
43.9 in.
(111.7 cm)
58.1 in.
(147.6 cm)
Closet or Door
48 in.² *
(310 cm²)
24 in.² *
(155 cm²)
3 in.
(7.6 cm)
3 in.
(7.6 cm)
*required spacing
Select a location
Finish the
installation
Connect the water and the drain
Adjust the levelling feet
Power on your washing machine
[run a test cycle]
Run a test cycle (Rinse+Spin) with small
amount of laundary
(about 4~5 Towels)
Yes
Confirm
you have
followed all
the previous
steps fully.
No
Does
your washer
have excess vibration
or noise?
01 installing your washer
WA3000J_WA40J3000AW_USER MANUAL_DC68-03520A-10.indd 13 2016/6/27 19:11:13