12_setting up your washer
setting up your washer_13
Quick program
The Quick program is good for light or slightly stained laundry.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Program
select button.
3.
Press the
Start/Pause
button. The water level is selected automatically.
4.
The wash, rinse, and spin cycles follow.
5.
To pause a program, press the
Start/Pause
button again. You can change the program
when it is paused.
6.
Close the lid.
Super Clean
Use this program to achieve the cleanest wash.
This program provides you with the optimum in washing performance through the 5-step super
clean system.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Program
select button.
3.
Press the
Start/Pause
button. The water level is selected at the mid-level between Mid and
Mid-low.
The water level is selected between Maximum and Mid or at the mid-level between Mid and
Mid-low.
4.
Close the lid.
ECO+ program
If you want to wash those frequently used towels or less dirty laundry time. Because washing is
speedy, it is good for light or less stained laundry.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Program
select button.
3.
Press the
Start/Pause
button.
4.
The wash, rinse, and spin cycles follow.
5.
To pause a program, press the
Start/Pause
button again. You can change the program
when it is paused.
6.
Close the lid.
Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Delay Start
button once.
You may set the delay end time using the
Delay Start
button from between 3 to 18 hours.
3.
Press the
Start/Pause
button and add the appropriate amount of detergent into the
detergent drawer.
4.
Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
• Detergent must be added into the detergent drawer.
• If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
• To cancel a Delay Start, press the
Power
button.
01 SETTING UP YOUR W
ASHER
WA12VP-02597C_EN.indd 13
2008-04-15 ¿ÀÀü 11:25:47
