12_setting up your washer
setting up your washer_13
setting up your washer
Wool program
Use this program to wash delicate clothing items such as washable sweaters, cardigans, and
other wool items.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Program
select button.
3.
Press the
Start/Pause
button. The water level is automatically selected at the mid-level
between Mid-low and Extra low. You can also adjust the water level manually.
4.
The wash, rinse, and spin cycles follow.
5.
To pause a program, press the
Start/Pause
button again. You can change the program
when it is paused.
6.
Close the lid.
• You can select only Cold water.
• The last spin cycle is a light cycle to prevent wrinkles.
• Use only detergent indicated by the laundry.
• Refer to the Care Label on the clothing for the appropriate wash information.
• Make sure buttons are fastened and that clothing is turned inside out.
• In the Wool program, Air Turbo and Silver Wash functions cannot be selected as it may
damage delicate items.
Memory program
Use this program to create your very own favorite or frequently used programs and store them in
the washer so that you can select them at any time.
1.
Press the
Power
button to turn the washer “
On
”.
2.
Press the
Program
select button.
3.
Select your frequently used functions.
Select Wash, Rinse, Spin or Silver Wash according to your requirements.
4.
Press the
Start/Pause
button to store them.
Only stored when the Wash + Rinse + Spin steps are selected.
5.
Add detergent and softener according to the water level and close the lid.
•
If you select the Memory program after turning the washer “
On
”, the stored settings are
automatically retrieved.
•
To change the stored settings, select the Memory program, reconfigure the settings and
then press the
Start/Pause
button. Then, the changes are stored.
Easy program
If you choose EASY, you will enjoy full access to all of Samsung Washing Machine’s userfriendly
functions at your fingertips. When selecting this program, Air Turbo, Silver wash and Mist Shower
are selected automatically.
1.
Press the
Power
button to “
On
”.
2.
Press the
Program
select button four times.
3.
Press the
Start/Pause
button. Water level is selected automatically. Washing rinsing, and
spinning follow. If you want to pause, press the
Start/Pause
button again. You can change
the Program when paused.
4.
Close the lid.
WA12VP-02597C_EN.indd 12
2008-04-15 ¿ÀÀü 11:25:46
