background image

- 2 -

SAFETY INSTRUCTIONS

Please note that the following precautions for safety intend to prevent unpredictable danger and damage by helping the proper use in safety.

When using hot water in washing, please make sure that the water should not exceed 50

˚

C.

Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.

WARNING

There might be serious injury or fatal accident when you violate this instruction.

If the power supply cord or plug is damaged or loosened, do not use.

• An electric shock or a fire may take place.

Do not pull the cord off or touch it with moist hands. 

• An electric shock or a fire may take place.

Do not bend the power supply cord by force or press it with heavy things.

• An electric shock or a fire may take place.

Do not install the washer nearby electric implement or don’t put a candle light

or cigarette light on the washer.

• A fire may take place.

Do not disassemble, repair or remodel it recklessly.

• When you need to repair it, please call service agent. An electric shock or a

fire may take place.

During operation, do not put your hands or metal materials under the washer.

• You may be hurt by spinning board beneath the washer.

Stay away from the washer when the bottom of the washer sinks into the

water.

• There might be an electric shock. Please wait until the water drains out

completely.

Do not put laundry stained with gasoline, benzene, or alcohol in the washer,

and keep the materials away from the washer.

• An explosion or a fire may take place.

During spinning, don’t put your hand in the spinning tub.

• It may hurt your hands. If it does not stop within 15 seconds after you open

the lid, call service agent immediately.

Cautions

There might be a slight injury or damage when you violate this instruction.

Don’t’ install it in the area with moisture or outdoor where it has rain or snow

• An electric shock or a fire may take place. 

Please unplug the power supply cord when you do not use it.

• An electric shock or a fire may take place.

If there is dust or water on the power supply plug and its connected part,

please remove it completely.

• An electric shock or a fire may take place.

Do not make your kids look into the inside of the washer.

• If your kid falls into the washer, his life could be in danger.

Ventilate immediately without touching the power plug if gas is leaking.

• An electric shock or a fire may take place if it catches flame.

If the washer makes strange noise, smell or smoke, unplug it promptly and call

service agent.

•  An electric shock or a fire may take place.

When cleaning, don’t spray water to the parts of the washer directly.

•  It may make it’s life span shorten. 

Also an electric shock or fire may take place

Don’t use several appliances together with an 
outlet. 

•  A fire may take place due to unusual heat.

Don’t press the button with an awl or pin.

•  An electric shock or a fire may take place.

Summary of Contents for WA1351S

















Reviews: