16_installation & maintenance
HOW TO CONNECT THE DRAIN HOSE (OPTION)
IN CASE OF PUMP-DRAINED WASHER
cap-hose
Take out the cap-hose and connect the
outlet-hose. (option)
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
90~100 cm
Drain hose
Hose guide
Be sure to join tightly the drain hose into the
drain-outlet on the side of the machine.
Install the drain hose in the position of about
90~100 cm above the ground. The end of the
drain hose can not be sinked under water.
IN CASE OF GENERAL WASHER (OPTION)
1.
After pressing the joint ring, insert to the drain hose.
2.
After directing the drain hose to a drain, join to the
drainoutlet of the washing machine.
drain-outlet
3.
Be sure to join them tightly by pressing the joint ring and
pushing it into the drain-outlet.
• The length of drain hose is adjustable so that you can
extend the length appropriately.
HOW TO
CHANGE THE DRAIN HOSE DIRECTION (OPTION)
• The handle of joint ring is pressed to pull out the drain hose.
Change the direction of the drain hose and follow the above
guideline again.
installation & maintenance
F500-03273C-03_EN.indd Sec6:16
F500-03273C-03_EN.indd Sec6:16
2/21/2017 4:48:05 PM
2/21/2017 4:48:05 PM
