OPERA
TION
Operating the vacuum cleaner
When the brush clings to the floors such as a carpet, a mat, bedding, etc. or does not spin
properly, change the suction power to ‘MIN’ or ‘MID’ mode.
Jet
(3sec)
Power ( ) on / off
When pressing the power button, the vacuum
cleaner starts operation in ‘MID’ mode.
• When the wet brush is assembled,
operation starts in ‘WET’ mode.
Jet
(3sec)
Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇
❇
The suction power control button does not
work in ‘WET’ mode.
❇
❇
‘JET’ mode: Hold the [+] button down for
3 sec. while in ‘MAX’ mode.
❇
❇
The ‘JET’ mode is not displayed separately
on the screen.
01
04
02
03
05
Checking the display
01
Clogged: When the dustbin, pipe, or
suction part is clogged
02
Spinning brush stuck: When a foreign
matter is clogged at the spinning brush
❇
❇
If the overheating prevention device of
the motor works, the spinning brush stuck
display will not turn on.
03
No Filter: When the washable micro filter
is not assembled correctly
04
Suction power: Displays current suction
power.
05
Wet brush cleaning mode: When the wet
brush is assembled
❇
❇
If the display above
01
,
02
, or
03
blinks a
few times and the vacuum cleaner stops
operation, please take action by referring
to the maintenance part of this manual.
English
18
VS7500_EN_00875H-00_UK.indd 18
2022-07-13 오후 2:48:39