English _
65
AUDIO DUBBING (VP-D392( i )/D395i ONLY)
This feature enables you to dub your voice through the internal microphone or other
audio equipment onto a pre-recorded camcorder tape.
The original sound on the tape will not be erased.
The Audio Dubbing function works only in
Player
mode.
➥
page 18
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
You can add sound to the original sound on a pre-recorded tape recorded in SP mode
with 12bit sound.
1.
Set the
Select
switch to
TAPE
. (VP-D395i only).
2.
Press the
MODE
button to set
Player
(
).
3.
Move the
Joystick (
W
/
X
)
left or right and fi nd the time frame of the scene to be
dubbed.
4.
Press the
Joystick
to playback, and press it again to pause the scene.
If you want to resume to playback, just press the
Joystick
again on playback.
5.
Press the
A.DUB
button on the remote control.
Audio dubbing ( ) indicator is displayed.
The camcorder is ready for dubbing.
6.
Press the
X
(PLAY)
button (on the remote control) or
Joystick
to start dubbing.
Press the
■
(STOP)
button (on the remote control) or move down the
Joystick (
▼
)
to stop the dubbing.
You can not use the Audio Dubbing function while playing a write protected video tape.
To utilize an external sound source, use the Audio/Video cable to connect external sound source input.
To dub from an external sound source, set
"AV In/Out"
function to
"In"
.
(VP-D391i/D392i/D395i only)
➥
page 68
•
•
•
•
•
•
•
•
•
•
<VP-D392( i )/D395i only>
STOP
16BIt
16:9 Wide
10Sec
S
C.Nite 1/30
No Tape !
12:00 1.JAN.2008
W
T
29
1/50
M
60min
0:00:00
SP
