Samsung VP-D361W, Service Manual

Page: 168 / 254

Operating Instructions
11-8
Samsung Electronics
ENGLISH
23 23
✤
Clock setup works in <Camera> / <Player> / <M.Cam> / <M.Player> modes.
➥
page 19
✤
The Date/Time is automatically recorded onto a tape. Before recording, please set the <Date/Time> .
➥
page 30
1. Set the [Power] switch to [CAMERA] or [PLAYER] .
2. Set the [Mode] switch to [TAPE] or [MEMORY] .
(VP-D363(i)/D364W(i)/D365W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <System> , then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Clock Set> , then press the [OK] button.
■
The year will highlight first.
6. Move the [Zoom] lever up or down to set current Year , then press the [OK] button.
■ The month will be highlighted.
7. You can set the month, day, hour and minute following the same procedure
after setting the year.
8. Press the [OK] button after setting the minutes.
■ A message <Complete !> is displayed.
■ To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the [OK]
button, then move the [Zoom] lever to the up or down to set respective values.
9. To exit, press the [MENU] button.
[ Notes ]
■ After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as
<00:00 1.JAN.2006> .
■ You can set the year up to 2037.
■
If the Lithium Battery is not installed, any input data will not be backed up.
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
Adjust Select Exit MENU OK ZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
…
†
Move Select Exit MENU OK ZOOM
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
1 JAN 2006
00 : 00
Complete !
Camera Mode
√
System
Clock Set
Remote
Beep Sound
Language
Demonstration
√
On
√
On
√
English
√
On
Move Select Exit MENU OK ZOOM
4
5
8
ENGLISH
24 24
✤
The Remote function works in <Camera> / <Player> / <M.Cam> / <M.Player> modes.
➥
page 19
✤
The Remote function allows you to enable or disable the remote control for use with the Camcorder.
1. Set the [Power] switch to [CAMERA] or [PLAYER] .
2. Set the [Mode] switch to [TAPE] or [MEMORY] .
3. Press the [MENU] button.
■ The menu list will appear.
4. Move the [Zoom] lever up or down to select <System> , then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Remote> , then press the [OK] button.
6. Move the [Zoom] lever up or down to select <On> or <Off> , then press the [OK] button.
7. To exit, press the [MENU] button.
[ Note ]
If you set the <Remote> to <Off> in the menu and try to use it, the remote control icon
( ) will blink for 3 seconds on the LCD Screen and then disappear.
Initial Setting : System Menu Setting
Setting the Wireless Remote Control Acceptance (Remote) (VP-D363(i)/D364W(i)/D365W(i) only)
Camera Mode
√
System
Clock Set
Remote
Beep Sound
Language
Demonstration
√
On
√
On
√
English
√
On
Move Select Exit MENU OK ZOOM
4
PLAYE
R
CA
M
ER
A
CA M
ER
A
PLAY
ER
1
Move Select Exit MENU OK ZOOM
Off
On
6
Camera Mode
Back
Clock Set
Remote
Beep Sound
Language
Demonstration
All manuals and user guides at all-guides.com