Samsung VP-D10, Owner'S Instruction Book

Page: 65 / 84

Playing back a tape
65
ENGLISH
Connecting to a TV which has no Audio and Video input jack
✤
You can connect your camcorder to a TV through a VCR.
1. Connect the comcorder and VCR with the Audio/Video cable.
■ The yellow plug : Video
■ The white plug : Audio(L)
■ The red plug : Audio(R) – STEREO only
2. Connect a TV with the VCR.
3. Set the power switch of camcorder to PLAYER.
4. Turn on the TV and VCR.
■ Set the input selector on the VCR to LINE.
■ Turn on the TV and select the channel reserved for your VCR on the TV.
5. Playback a tape.
✤
You can play the recorded tape in PLAYER mode.
1. Connect a power source and
Set power switch to PLAYER.
2. Insert a tape you want to see.
3. Using (FF) and (REW) buttons, find the first position that you want to see.
4. Press the (PLAY/STILL) button.
■ The picture you recorded appears on the TV after a few seconds.
■ If the tape reaches its end during playback, the tape will rewind automatically.
Reference
■ It is best to decrease the volume of the built-in speaker when your camcorder is connected to the TV.
■ The playback mode (SP/LP) is selected automatically.
Playback
1 2 3 4 5 6 7 8 9 10 ALARM IN ALARM OUT ALARM RESET GND TRIGGER OUT TAPE END OUT SERIES OUT GND SERIES IN 1 SHOT REC IN
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
IN OUT
OUT IN
CAMCORDER VCR
TV
S-VIDEO S-VIDEO
VIDEO
(L)
(R)
AUDIO
TV ANTENNA
PLAYER
PLAY/
STILL
00542E VP-D10 UK (~P83) 3/13/03 10:25 AM Page 65