Samsung Electronics
2-1
✤
Remove the power source before replacing the
bulb.
✤
Use the JC6V-3W/G4 (100H) halogen lamp
(maker : USHIO) to reduce the disk of fire.
✤
If you have any trouble in replacing the bulb,
contact you nearest authorized service center.
1. Disassemble the VIDEO LIGHT unit from cam-
corder with a small screwdriver (see figure).
2. Pull out the VIDEO LIGHT unit carefully. Take
care of the cable which connects the LIGHT and
camcorder.
3. Disassemble the cover carefully from the
LIGHT unit.
Be careful. The cover is easily broken.
4. Pull out the bulb with flat pliers.
The bulb is easily broken. Do not apply exces-
sive force when you use flat pliers.
5. Replace the bulb.
Replace the bulb using flat pliers and a dry
cloth.
The dry cloth is used to prevent finger prints.
Make sure that the bulb is exactly in place to
reduce the risk of fire.
6. Assemble the cover carefully to the LIGHT unit
(see figure).
7. Assemble the LIGHT unit to camcorder with a
small screwdriver (see figure).
Note : To prevent the bulb from being smudged
with finger prints, handle it with a dry cloth,
etc. If the bulb is smudged, wipe it com-
pletely.
2. Service Tips
2-1 How to replace the bulb
PUSH
1
2
1
2
H
cloth
