Samsung Voice Yepp VY-H200, Manual

Page: 23 / 27

45 44
No display
on the LCD.
Check
point 1
Is the battery dead?
❿
Replace the battery.
Check
point 2
Are the battery
poles positioned
correctly?
❿
Insert the battery with
its poles in the correct
position.
Recording is
disabled.
Check
point 1
Are the recording
numbers all used up or is
recording memory full?
❿
Delete
unnecessary files.
Check
point 2
Is the battery dead?
❿
Replace the
battery.
No sound is
heard from
the speaker.
Check
point 1
Is the volume set to ‘0’?
❿
Adjust the volume.
Check
point 2
Are the earphones
plugged-in to the
product?
❿
Unplug the
earphones.
Playing is
disabled.
Check
point 1 Is the product in
Hold mode?
❿
Release the Hold
switch.
Check
point 2 Is there anything
to record?
❿
Check the recording
number.
Check
point 3
Is the battery dead?
❿
Replace the battery.
Check
point 4
Is a MP3 file saved
in a voice folder or a
voice file saved in a
MP3 folder? ❿
Save the file in the
correct folder.
Troubleshooting
No sound is
heard from the
earphones.
Check
point 1
Is the volume set to ‘0’?
❿
Adjust the volume.
Check
point 2
Are the earphones
correctly plugged-in
to the product?
❿
Plug-in the
earphones
correctly.
Formatting (You will lose all data in the Voice yepp.)
Re-Format the Voice yepp if the defect was caused by an
external impact.
➔
Turn the power off of Voice yepp. Press and hold the
Play/Pause button while holding the Folder button.
Your Voice yepp is now initialized.
None of the
buttons work.
Check
point 1
Is the backlight
illuminated on the LCD?
All saved files will be deleted
and the product will be initialized
when the Play/Pause button is
pressed and held while holding the
Folder button with the Voice yepp
power off. Do not repeat this action
in vain as it may cause a break down.
❿
Remove and re-
insert the battery.
Cannot
connect the
unit to a PC.
Check
point 1 Have you connected
the USB cable in the
correct way?
❿
Disconnect the
USB cable and
re-connect. If the
problem persists,
re-boot the PC.
H200-America 3/11/03 2:22 PM Page 44