10. Disassembly and Reassembly
10. Disassembly and Reassembly
10.1. Disassembly of main unit
CAUTION
Precaution for disassembly/reassembly
1) Set up the repair table where the anti-static mat is installed to disassemble and reassemble the camera.
2) When handling the key PCB of the camera, wear the anti-static band on the wrist to prevent any error from static
electricity.
3) When handling key parts, be careful of the following.
Table 10.1
9-1
Part
Precaution
F PCB Type
When assembling the F PCB to the CONNECTOR with a pin set, be careful not to
cause dents or tears on the PCB.
CCD and IR CUT
When handling the parts, be careful not to leave any fingerprints.
Use the pin set with soft tips.
When cleaning the parts with alcohol, be careful not to cause any stains.
Do the repair work in a dust free environment.
PCB Type
Always use the anti-static mat and wrist band, as the parts can be damaged from static
electricity from the hand.
CONTACT Type
Be careful of damage of deformation of parts from the pin set.
No
Disassembly image
Disassembly description
1
Remove 2 Screws.
2
Remove 1 Screw.
10-1
Copyright© 1995-2011 SAMSUNG. All rights reserved.
