background image

4

NOTE :

ON/OFF switch is combined with POWER CON-

TROLLER - To start or stop the unit just lightly
press it downward.

ON/OFF SWITCH

With the cord plugged into an electrical outlet, start or
stop the vacuum cleaner by pushing lightly downward
on the switch.

NOTE :

If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn
the cleaner off and check whether the hose, tube or nozzle is clogged.

DUST-FULL INDICATOR

If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement.

POWER CONTROL

(VARIABLE CONTROL TYPE ONLY)

MIN

MAX

MIN

MAX

The vacuuming power can be adjusted to suit any situa-
tion  with the electrical power control.

MIN = For delicate fabrics, e.g.net curtains.
MAX = For hard floors and heavily soiled carpets.

-To adjust power output just turn it right or left.

USING THE ACCESSORIES

CREVICE

DUSTING

Crevice tool for radiators, crevices,
corners, between cushions.

Dusting brush for furniture,
shelves, books, etc.

• Before use, assemble the dusting

brush to the crevice tool

TOOL STORAGE

Your cleaner features a tool storage device.
Assemble the accessory hanger on to the extension tube.
It can be used to store the cleaning tools while they are not in use.
This tool can be separated into two parts.

DJ68-00068A(0.2)  2/20/04 3:30 PM  Page 5

Summary of Contents for VC-5913









Reviews: