SECONDARY FILTER
SECONDARY FILTER
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards.(The
clamper is located at the front of the dust cover)
2) Remove the dust bag from the cleaner.
FOR CLOTH FILTER BAG
MAINTENANCE OR REPLACEMENT OF THE FILTERS
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
OUTLET FILTER
▼
INLET FILTER
To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust
compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage
may result. After cleaning the secondary filter attach it in place.
▼
NOTE:
The filters must be completely dried before being replaced in the dust compartment.
1) Open the grille part, separate the
exhausted filter.
2) Reassemble it after cleaning or replacing
the filter in the reverse order.
6
REPLACING THE DUST BAG
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag
into its original position.
4) Press the dust cover down gently until the
clamper relocks.
DJ68-00092C 8/31/04 4:57 PM Page 7
