Quick Reference Guide
27
5.1 Flash Disk
Devices with Windows CE basically use RAM-based standard storage disks. This product also
uses this type of storage disk. It can use RAM as hard disk of your desktop and consumes only
small power. However, it loses all programs and data in cold reset. This device also uses Flash
ROM storage, which preserves data even in cold reset. Flash ROM is a little slower than RAM,
but it is just as convenient.
Flash ROM storage is called “Flash Disk.” Take the following steps in order to use it:
1. Click Internal Device icon on the Windows.
2. Double-click “Flash Disk” to show contents inside.
You can copy or add files to “Flash Disk.” The Flash Disk of this product is limited to 128MB.
To process larger sizes of data, use CF memory card or SD memory card.
5.2 Installing Program
Basic pre-installed programs are stored in the “ROM” disk and are automatically reinstalled
after cold reset. These programs cannot be removed or modified. However additional
programs are stored on RAM-based storage or Flash Disk and can be added/deleted/modified
any time.
5.2.1 Using Installation Wizard
Most programs in the market come with installation wizards and are easy to install.
However, installation wizards must be installed in connection to desktop through ActiveSync.
Connect ActiveSync to desktop and install a program to automatically install the program on
your PDA.
5.2.2 Manual Installation
If there is no installation wizard offered with a program or it causes a problem during
installation, you must install the program manually.
1. Copy related files (*.cab, *.exe, etc) to a convenient location on your desktop.
2. The WindowsCE.Net application program would also work well on the device.
3. After downloading the program to your desktop computer, run the program. Files in *.cab
format are used in installation on Windows CE and are automatically unzipped when run.
4. Complete installation and run program.
5.3 Adding New Program to Start Menu Using File Finder
1. Run File Finder and open folder where the new application program is installed.
2. Use Task Bar to select “Edit-Copy.”
3. Open “Windows-Program” folder and use “Paste” or “Paste Shortcut Icon” at a convenient
location.
4. The select application program will appear on the Start Menu.
5.4 Adding New Program to Start Menu Using ActiveSync
1. Connect to Desktop using ActiveSync and run File Finder on desktop and open “Mobile
Device.”
2. Open folder where program is installed and run “Edit-Copy.”
3. Open “Windows-Program” folder and use “Paste” or “Paste Shortcut Icon” at a convenient
location.
4. The select application program will appear on the Start Menu.
