background image

5 Way Function 

Press the        (ON/OFF) button one time and then select the desired
mode.

1

To stop the operating, press the        (ON/OFF) button until all indicators 
turn off.

2

You can select the 5 Way function with operating mode of the air conditioner for
more comfortable circumstances. You can use the 5 Way function with the indoor
unit as well as the remote control. Thus, you can use this function 
even though you have lost your remote control.

Using with the indoor unit

To select the 5 Way function with the remote control, press the 5 Way 
button one or more times until the desired mode is selected.

Each time you press the 5 Way button:

Each 5 Way indicator on the indoor unit lights up in order.

Selecting with the Remote Control 

Even if the air conditioner has been turned on via the ON/OFF
button on the unit, operations can still be controlled using the
remote control as usual.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

To obtain a(n)...

Normal operating

(STANDARD) mode

Then select...

(NATURE) mode

Reducing the uncomfortable
temperature gradually

(POWER) mode

High fan speed

(SAVING) mode

Compressor run time reduced

(SILENCE) mode

Fan speed reduces as the temperature
decreases

E-

9

ENGLISH

Summary of Contents for UQ30C1(2)BC




























Reviews: