3-2
3. Disassembly and Reassemble
Description
Picture Description
4
Insert the Samsung Service Jig at the
indicated positions (Holes) to release
bottom corners of the rear cover.
BN81-12884A (SVC-JIG)
Example
5
Gently lift up the Rear Cover from the
bottom corners to release all mounting
clips as indicated by Red Rectangles.
If tabs break, Using Back coever as it is.
Bottom
: 2 point Locking
Top
: 6 point Locking
L
: 6 point Locking
R
: 6 point Locking
Main part
: 1 Point Locking
SMPS part
: 1 Point Locking
<Locking tabs locations>
6
Remove the Electric tapes, Remove them.
•
Filament Tape
•
Dressing
NOTE
When assembling the TV, the electric
•
tapes must be applied on the same
locations. Please remember to take a
picture of where the tapes were first
applied.
When assembling the Boards, please
•
make sure All Board
Mounting Clip
s
are securly inserted.
Caution
Caution