background image

English - 9

 

NOTE

 

Make sure to distinguish between the front and back of each component when assembling them.

 

Make sure that at least two people lift and move the TV.

 

Stand the product up before you tighten the screws. If you tighten the screws with the TV lying 
down, it may lean to one side when you stand it up.

 

[

Do not insert your fingers into the stand base slot of the TV when installing the stand base.

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the 
manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious 
injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided with the wall mount. 
We recommend you contact a technician for assistance when installing the wall mount bracket. We do not 
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury 
to yourself or others if you elect to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

VESA Wall Mount Kit Notes and Specifications

 

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to 
surfaces other than plaster board, please contact your nearest dealer for additional information. If you 
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

 

NOTE

 

Standard dimensions for wall mount kits are shown in the table below. 

 

Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly 
are provided.

 

Do not use screws that do not comply with the VESA standard screw specifications. 

 

Do not use screws that are longer than the standard length or do not comply with the VESA 
standard screw specifications. Screws that are too long may cause damage to the inside of the TV 
set.

 

For wall mounts that do not comply with the VESA standard screw specifications, the length of the 
screws may differ depending on the wall mount specifications. 

 

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, 
leading to personal injury. Samsung is not liable for these kinds of accidents.

[UE7550-ZA]BN68-04371A-00Eng.indb   9

2012-05-31   �� 4:57:49

Summary of Contents for UN55ES7550F

































































Reviews: