4-7-2. How to Upgade Software
Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.
1.
NOTE
Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied.
The TV will turn off and turn on automatically after completing the firmware upgrade.
2.
Please check the firmware version after the upgrades are complete.
3.
the new version will have a higher number than the older version.
-
NOTE
When software is upgraded, video and audio settings you have made will return to their default (factory)
•
settings.
We recommend you write down your settings before beginning firmware update.
•
After update is completed, restore your previous settings.
4.
Main Software Upgrade
Store the sw program named "
T-NT14UAKUC
" in USB memory stick.
Click the "
MENU
" key in Remote Controller.
Select "
Support
-
Software Update
-
Update Now
" menu.
Click the "
ENTER
" key.
Wait for upgrade complete.
•
Check the Software Version.
•
4-53
4. Troubleshooting
Summary of Contents for UN40HU6900F
