English - 13
Eng
lis
h
04 Initial Setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish
the initial setup process. You can manually perform this process at a later time in the
>
Settings
>
General
>
Start Setup
menu.
•
If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-
top box automatically.
•
If you do not want to select Set-top box, please select
Aerial
.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at the bottom of the TV, and then use the Control Menu. The
Control menu
appears when the TV Controller is pressed while the TV is On. For more information about its usage,
refer to the figure below.
TV Controller / Remote control sensor
Press: Move
Press & Hold
:
Select
The
TV Controller
is located on the bottom of
the TV.
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
Control menu
