English - 13
Eng
lis
h
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the
initial setup process. You can manually perform this process at a later time in the
MENU
m
→
System
→
Setup
menu.
•
If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-
top box automatically.
•
If you do not want to select Set-top box, please select
Aerial
.
If You Want to Reset This Feature...
Select
System
→
Setup
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the
Change PIN
function.
You should do
Setup
(
MENU
m
→
System
) again at home even though you did in shop already.
•
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to “0-0-0-0”:
MUTE
→ 8 → 2 → 4 →
POWER
(on)
Using the TV Controller
You can turn on the TV with the
TV Controller
button at the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the TV Controller is pressed while the TV is On. For more information about its usage,
refer to the figure below.
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
Control menu
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The
TV Controller
is placed at the bottom
of the TV.
04 Initial Setup
Summary of Contents for UE40M5000A
Page 64: ...Thispageisintentionally leftblank ...
Page 96: ...Thispageisintentionally leftblank ...
Page 130: ...Thispageisintentionally leftblank ...
Page 131: ...Thispageisintentionally leftblank ...
