1
English
Getting S
tar
ted
Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the power,
channel and volume buttons only.
1
Television Standby button.
This button only works when you press it for longer than 1.5 seconds.
2
<
: Next channel /
>
: Previous channel
3
+
: Volume up /
–
: Volume down
4
IrDA transmitter
Use the Mini Remote Control so that this part faces the TV.
Installing Batteries in the Remote Control
Normal Remote Control
1
Lift the cover at the back of the remote control upward as shown in the figure.
2
Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
the compartment.
3
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using
the remote control for a long time. (Assuming typical TV usage, the batteries
should last for about one year.)
OPERATION
Mini Remote Control
1
Turn the battery cover counterclockwise to unlock it and then separate the battery
cover.
2
Insert the corresponding 3V Lithium battery.
3
Place the battery cover into the remote control aligning it with the grooves and then
turn the battery cover clockwise to lock the cover.
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
OPERATION
■
■
■
■
■
■
1
4
2
3
2
3
OPEN
CLOSE
BN68-01985L_Eng-1.indd 15
2009-03-27 �� 6:42:48
