Samsung UD55D User Manual Download Page 111

Page: 111 / 241

111

System

Chapter 07

Multi Control

m : T

System

Multi Control

ENTER

Multi Control

ID Setup

ID Input

MDC Connection

DisplayPort daisy chain

RS232C MDC

Clone

The displayed image may differ depending on the model.

Configuring settings for Multi Control

•

ID Setup

Assign an ID to a set. (Range: 0~99)
Press or to select a number, and press

•

ID Input

Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.

•

MDC Connection

Select a method to connect to MDC to receive the MDC signal.

RS232C MDC

: Communicate with MDC via the RS232C-stereo cable.

RJ45 MDC

: Communicate with MDC via the RJ45 cable.

•

DisplayPort daisy chain

To display the

DP IN

video input through the

DP OUT

output port, select a device connection method from Single

Stream Transport (SST) and Multi Stream Transport (MST).

Clone

: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices

connected.

―

Clone

is selected, the

recognizes the two displays as a single monitor.

―

Clone

mode is enabled if the input source is a digital input other than

DisplayPort

, such as

DVI

HDMI

MagicInfo

Expand

: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices

connected.

―

Expand

is selected, the

recognizes the two displays as separate monitors.

―

The mode functions only on a PC that supports DisplayPort 1.2 MST.

―

For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.

Summary of Contents for UD55D


















































































































































































































































Search results

Summary of Contents for UD55D

Reviews:

Samsung UD55D, User Manual, Page: 111 / 241

Search results

Summary of Contents for UD55D

Reviews: