The problem
Try this!
The message "Connecting to
device..." or
"Disconnecting from
device" appears on the screen.
You cannot use the remote control when the TV is configuring or switching
to the TV viewing screen.
Use the remote control after the TV has completed the configuration or has
switched to the TV viewing screen.
The device won't play.
You cannot use the play function when
Reset
is in progress.
The connected device is not
displayed.
Check whether the device supports .
devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support .
Check whether the HDMI cable is properly connected.
Go to
(HDMI-CEC)
and see if
(HDMI-CEC)
has been set to
On
.
•
Settings
General
External Device Manager
(HDMI-CEC)
Scan for devices again.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
Remote Control Issues
When the remote control isn't working, these steps may help resolve the problem.
The problem
Try this!
The remote control does
not work.
The connection between the remote control and the TV may be lost.
Also, if the remote control is not working or slow, the batteries might be low or dead. If this
is the case, replace the batteries. Alkaline batteries are recommended for longer battery
life.
External devices cannot be
operated with the TV
remote control.
Check the cable connection between the TV and external devices.
When the symptom persists, set it manually in
Source
Universal Remote Setup
.
- 115 -
