Samsung TP29J10, Owner'S Instructions Manual

Page: 21 / 101

23
T V O
P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
▲
and
CH
▼
buttons to scan through the channels. This eliminates the need to change chan-
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the UP/DOWN
▲▼
buttons to select
“Channel”.
Press the LEFT/RIGHT
œ œ√ √
buttons.
2
Press the UP/DOWN
▲▼
buttons to select
“ANT/CATV”.
Repeatedly press the
LEFT/RIGHT
œ œ√ √
buttons to
cycle through these choic-
es:
ANT (antenna), STD, HRC or
AFN (all cable TV).
Note: STD, HRC and AFN identify various types of cable TV
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to
“Storing Channels in Memory” (next page).